Yol ve köprü
Toplam 71 ürün
Yol altyapısı ve üstyapı malzemeleri, köprü ana yapısı ve tünel mühendisliği malzeme ve ekipmanları, yeraltı ortak teknik galerileri, trafik güvenlik tesisleri ve destekleyici mekanik-elektrik sistemler; karayolu, köprü ve tünel projelerine hizmet eder.
PVC-C Cable Conduit ID150 (Utility Tunnel)
Selected size: dn150 Nominal inner diameter 100-200mm, ring stiffness SN8/SN12/SN16 with wall thickness 4.0-13.0mm, belled end connection, 6m lengths (other forms on request), orange; matching long sweep bends, plugs and duct pillows.
PVC-C Cable Conduit ID200 (Utility Tunnel)
Selected size: dn200 Nominal inner diameter 100-200mm, ring stiffness SN8/SN12/SN16 with wall thickness 4.0-13.0mm, belled end connection, 6m lengths (other forms on request), orange; matching long sweep bends, plugs and duct pillows.
HDPE Double-Wall Corrugated Duct dn110 (Utility Tunnel)
Selected size: dn110 dn 63/75/90/110mm, ring stiffness SN6.3, 6m lengths, double-wall corrugated structure with smooth inner wall and low friction, coupled joint with gasket; black.
Class A/K12 High-Security Anti-Terrorism Rising Bollard (Standard Deep-Buried Hydraulic)
Diameter: 273±2mm Blocking Height: 1000mm Embedded Depth: 1556mm Dimensions: 1067*792*1556mm
Class A High-Security Anti-Terrorism Rising Bollard
Diameter: 273±2mm Blocking Height: 1000mm Embedded Depth: 1540mm Dimensions: 815*500*1540mm
Class B/K4 High-Security Anti-Terrorism Rising Bollard
Diameter: 219±2mm Blocking Height: 1000mm Embedded Depth: 1519mm Dimensions: 695.5*485*1519mm
Class D Anti-Terrorism Rising Bollard
Diameter: 219±2mm Blocking Height: 600mm Embedded Depth: 1150mm Dimensions: φ400*1150mm
Class D Dual-Section Shallow-Buried Rising Bollard
Diameter: 219/273±2mm Blocking Height: 600mm Embedded Depth: 530mm Dimensions: 470*775*530mm
Class D Shallow-Buried Rising Bollard
Diameter: 219±2mm Blocking Height: 600mm Embedded Depth: 800mm Dimensions: φ400*800mm
Class E fully automatic retractable bollard
Diameter: 219±2mm Blocking height: 600mm Embedded depth: 1129mm Dimensions: φ400*1129mm
Class B standard road blocker
Blocking height: 600 mm Blocking width: 3000–6000 mm Embedded depth: 880 mm Dimensions: (blocking width + 180) × 1260 × 880 mm
Class B/K4 anti-ram barrier gate
Blocking width: 3–8 m Lifting/lowering speed: 4–14 s Drive mode: fully automatic/manual Center blocking height: 900 mm
Speed bump-type tire deflator
Equipment width: 500 mm Spike plate thickness: 10 mm Dimensions: (blocking width + 490) × 500 × 68 mm Blocking width: 1–8 m
In-ground tire deflator
Equipment width: 500 mm Spike plate thickness: 10 mm Dimensions: (blocking width + 554) × 500 × 68 mm Blocking width: 1–8 m
Light-duty tire deflator
Equipment width: 400 mm Spike plate thickness: 8 mm Dimensions: 1000 × 400 × 160 mm Blocking width: 1000 mm
LED Street Light 150W (GT10 series, 3030 LED)
Power: 150 W Luminous flux: 22500 lm (140-150 lm/W class) LED: 3030 package (5050 optional) CCT: 2200-2500K (amber) / 3000-4000K (WW) / 4000-5000K (NW) / 5000-6000K (CW) CRI: ≥70 Beam angle: 150°×80° (T2M/T3M anti-glare options) Input: 100-240 VAC, 47-63 Hz Operating temperature: -40~+45°C (storage -40~+75°C) Housing: aluminum alloy, stainless steel fasteners, tempered glass, optical PC lens Protection: IP66, IK08 Lifespan: >100,000 h
LED Street Light 150W (G9 series, high efficacy)
Power: 150 W Luminous flux: 24000 lm (≥150-160 lm/W class) CCT: 3000±300K (WW) / 4000±300K (NW) / 5700±300K (CW) CRI: ≥70 Beam angle: 160°×85° / 160°×95° Input: 100-240 VAC, 47-63 Hz Operating temperature: -30~+60°C Protection: IP67, IK10 Lifespan: >100,000 h
LED Street Light 60W (G7 series)
Power: 60 W Luminous flux: 9000 lm (≥150 lm/W) CCT: 3000±200K / 4000±300K / 5700±300K CRI: ≥70 Beam angle: 155°×75° / 150°×80° Input: 100-240 VAC, 47-63 Hz Operating temperature: -30~+50°C Protection: IP67, IK10 Lifespan: >100,000 h
LED Street Light 80W (G5 series, NEMA photocell)
Power: 80 W Luminous flux: 11600 lm (140-145 lm/W) CCT: 3000±300K / 4000±300K / 5000±300K / 5700±300K CRI: ≥70 Beam angle: 150°×50° (T2M/T3M/T5M distributions) Input: 200-240 VAC, 47-63 Hz Operating temperature: -40~+55°C Housing: die-cast aluminum + optical PC Protection: IP66, IK08 Lifespan: >100,000 h
LED Garden Street Light 50W (GD5 series)
Power: 50 W Luminous flux: 6250 lm (≥125 lm/W) LEDs: 96 pcs CCT: 3000±200K / 4000±300K / 5700±300K CRI: ≥70 Beam angle: T1 / T2M / T3M / T5M distributions Input: 100-240 VAC Operating temperature: -30~+40°C Protection: IP66, IK08 Lifespan: >100,000 h
Solar LED Street Light 150W (S7 series, split PV)
Power: 150 W Luminous flux: 15000 lm (100-185 lm/W) PV module: 300 W mono Battery: LiFePO4 1229 Wh CCT: 4000±300K / 5000±300K / 5700±300K CRI: ≥70 Autonomy: 3 days (12 h/day) after full charge; PV efficiency 20-23% Control: microwave sensor / time control / remote Protection: IP66, IK10 Lifespan: >100,000 h
Solar LED Street Light 40W (S6 series, all-in-one)
Power: 40 W Luminous flux: 4000 lm PV module: 48 W Battery: LiFePO4 230 Wh CCT: 3000K (WW) / 4000K (NW) / 5700K (CW) CRI: >70 Charging: 4-6 h; autonomy: 3 days intelligent mode + 4 days low-brightness mode Control: PIR motion sensor + light control Beam angle: 150°×70° Operating temperature: -10~+50°C Housing: aluminum + stainless steel + PC Protection: IP66, IK09 Lifespan: >100,000 h
Solar LED Street Light 120W (S5B series)
Power: 120 W Luminous flux: 12000 lm (100/200 lm/W class) PV module: 151 W mono Battery: LiFePO4 768 Wh CCT: 3000K (WW) / 4000K (NW) / 5700K (CW) CRI: >70 Charging: <6 h; autonomy: 3 days Control: motion / PIR Beam angle: 155°×70° (T2M/T3M bat-wing, anti-UV) Protection: IP66, IK10 Lifespan: >100,000 h
LED Tunnel Light 150W (T11 series)
Power: 150 W (20-100 W and 120-270 W sizes) Luminous flux: 25500 ±5% lm (no-glass 165 lm/W; glass 150 lm/W) LED: 5050 package (2835 optional) CCT: 3000±300K / 4000±300K / 5000±300K / 5700±300K CRI: ≥70 Beam angle: 75°×145° (2835) / 65°×145° (5050) Input: 47-63 Hz (100-240 VAC class) Operating temperature: -30~+45°C (storage -40~+60°C) Housing: aluminum alloy + optical PC + tempered glass + stainless steel Protection: IP66, IK10 Lifespan: >100,000 h
LED Tunnel Light 200W (T10 series)
Power: 200 W Luminous flux: 34000 ±5% lm (170 lm/W class; 165 lm/W at 100 W) LED: 5050 package CCT: 3000±300K / 4000±300K / 5000±300K / 5700±300K CRI: ≥70 Beam angle: 75°×145° (2835) / 65°×145° (5050) Input: 47-63 Hz (100-240 VAC class) Operating temperature: -30~+45°C (storage -40~+60°C) Protection: IP66, IK10 Lifespan: >100,000 h
LED Tunnel Light 100W (T9 series)
Power: 100 W (range 40-450 W) Luminous flux: 14000 ±5% lm (≥150 lm/W at 40-120 W; ≥140 lm/W at 150-450 W) CCT: 3000±300K / 4000±300K / 5700±300K CRI: >70 Beam angle: 85°×155° / 102°×155° / 125°×148° / 23°×105° Input: 100-240 VAC, 47-63 Hz Operating temperature: -30~+60°C Housing: aluminum alloy + optical PC + tempered glass + stainless steel Protection: IP67, IK10 Lifespan: >100,000 h
Full Matrix Variable Message Sign P16 (RGB SMD, gantry type)
Pixel pitch: 16 mm (P10/P12/P16/P20/P25/P31.25 available) LED: RGB SMD 3-in-1, full matrix Module: 256×256 mm, 16×16 dots; density 3906 dots/m² Luminance: L3 class (white >12400 cd/m², red >3100 cd/m²); brightness ratio 20:1 at 40000 lux Chromaticity: C2; beam width: R3 (B1-B7 configurable); contrast 20:1 Brightness control: 32 grades, auto photosensor, fanless Communication: RJ45, RS232/RS485, TCP/IP, 3G/4G Protocols: NTCIP, MODBUS, XML, Profibus, DGT Power: 110-240 VAC 50/60 Hz; max 168 W/m², avg 78 W/m² Cabinet: aluminum alloy; front/back IP66 (P33); pollution degree D4 Temperature: T1/T2&T3, -40~+60°C, RH <95% EMC: EN 55032; viewing/legibility >200 m
Full Matrix Variable Message Sign P25 (RGB SMD, gantry type)
Pixel pitch: 25 mm (P10/P12/P16/P20/P25/P31.25 available) LED: RGB SMD 3-in-1, full matrix Module: 200×200 mm, 8×8 dots; density 2500 dots/m² Luminance: L3 class (white >12400 cd/m², red >3100 cd/m²) Chromaticity: C2; beam width: R3 (B1-B7 configurable); contrast 20:1 Brightness control: 32 grades, auto photosensor, fanless Communication: RJ45, RS232/RS485, TCP/IP, 3G/4G Protocols: NTCIP, MODBUS, XML, Profibus, DGT Power: 110-240 VAC 50/60 Hz; max 95 W/m², avg 43 W/m² Cabinet: aluminum alloy; front/back IP66 (P33); pollution degree D4 Temperature: T1/T2&T3, -40~+60°C, RH <95% EMC: EN 55032; viewing/legibility >200 m
Variable Legend Sign P25 (full color pictogram panel)
Pixel pitch: 25 mm (P20/P25/P31.25 available) LED: RGB, NICHIA / EPISTAR Module: 320×160 mm, 16×8 dots; density 1600 dots/m² (P25) Luminance: L3 / L3* / L3(T); chromaticity C1/C2; beam width B1-B7 Brightness control: 32 grades auto/manual; viewing distance >200 m Power: 110-230 VAC; max 95 W/m², avg 43 W/m² (P25) Protection: P3/IP66; temperature -40~+60°C Communication: RS232/RS485, TCP-IP, GPRS Protocols: NTCIP, XML
LED Predefined Sign 1200×1200 mm (variable speed limit / lane signal)
Panel size: 1200×1200×150 mm (customizable) Legend: EN 12966 character height; circle diameter 900-1000 mm Display: white digits, red circle, red cross, green arrow, yellow flashers (4 corners) LED: NICHIA / EPISTAR Luminance: L3 / L3* / L3(T); chromaticity C1/C2; beam width B1-B7 Cabinet: aluminum alloy (60 kg/m²) or steel (65 kg/m²) Brightness control: 32 grades Power: 110-230 VAC, ≤45 W Protection: P3/IP66; temperature -40~+60°C Communication: RS232/RS485, TCP-IP, GPRS Protocols: MODBUS, NTCIP
Character Matrix VMS (P25, 1-4 lines)
Lines: 1-4; characters per line: 8/12/15/16/18/21 by character height Pixel pitch: 20/25/45/66 mm; character height: 100-450 mm Luminance: L3 / L3* / L3(T); chromaticity C2; beam width B1-B7 Standard: EN 12966; protection P3/IP66; pollution D4 Brightness: 32 levels auto/manual; microprocessor diagnostic Cabinet: aluminum / galvanized steel Power: 12/24 V DC or 110-230/380 V AC Communication: RS232/RS485/RJ45, 3G/4G
Traffic Guiding Sign P10 (graphic route display, env monitoring option)
Pixel pitch: P10 LED: 1R1G1B Luminous intensity: 6000 cd/m² Viewing distance: 30-200 m Driving: 1/4 constant current Power: ≤50 W; input 180-250 VAC Communication: GPRS / TCP-IP LED lifetime: ≥100000 h; temperature -40~+60°C
Parking Guidance Sign (P8, R/G/A/W)
Colors: Red / Green / Amber / White LED: SMD outdoor or optical lens design Pixel pitch: 6 mm / 8 mm / 10 mm Viewing distance: approx. 100 m; viewing angle 120°/120° Features: ultra reflective film, multi-language, high brightness Cabinet: aluminum alloy or stainless steel, protection IP56; panels detachable Communication: RS232/RS485, 3G/4G
Portable VMS Trailer Type II (P16/P20, 2.0×1.5 m, solar)
Type II display: 2.0 m × 1.5 m; resolution 120×80 pixels Pixel pitch: P16 / P20 (Type I: P10/P12 1.5×1.0 m 96×64; Type III: P25/P31.25 2.8×1.8 m) LED: RGB (RGBWA) Power: solar — 140 W PV panels ×2/3, 12 V 120 Ah batteries ×2/3 with solar controller (AC option) Structure: hot-dip galvanized, anti-UV powder coating, retractable draw bar, lifting mechanism electric/hydraulic Communication: RS232/LAN/4G/5G, 3G/4G module, GPS location Control: remote ITS / computer / mobile; worksheet display IP65 Cabinet: cold-rolled steel / aluminum / stainless steel; constant current driving
Speed Warning Sign (3-digit, microwave radar, green/red)
Display: 3 digits, 24×16 pixels, dual color (green & red) Target speed setting: 5-240 km/h Radar: microwave, accuracy ±1 kph; lanes: 2-5 Viewing: 5-50 m; angle ±60° Communication: RS232/RS485/LAN Protocols: NTCIP / MODBUS Power: AC 220 V / DC / solar options Temperature: -40~+60°C, RH 10-100%
Vehicle Actuated Sign VAS (solar, 4G)
Luminance: 6500 cd/m², auto-dimming Display: 660×710 mm; marine grade aluminum enclosure (6062 H32), IP65 Viewing angle: H-30°/V-30° Radar: 10-255 km/h, detection ~300 m, response 5 ms Power: solar panel + battery or mains; 12 V DC Memory: 256 M + 2 G; data buffer 90 days; daily report (Excel); I/O module; 4G modem; Android app control Temperature: -25~+60°C; service life 15 years Compliance: AS/NZS 3000, AS 5158, AS/CA S009:2013
Radar Speed Warning Sign P25 (full color, 4G)
Pixel pitch: P25; full color RGB-in-1 SMD with optical lens Luminance: 12000 cd/m² max white, auto-dimming photosensor Display: 610×410 mm, 24×16 pixels; cabinet 760×650×120 mm aluminum alloy Viewing angle: H-30°/V-30° Radar: 5-255 km/h, accuracy ±1 kph, detection ~300 m, response 5 ms Power: AC 85-140 V / 180-260 V or solar; working 12 V DC; avg 50 W Memory: 256 M + 2 G; daily report Excel; data buffer 90 days; 4G module Temperature: -25~+60°C
Lane Control Sign (CD350/CD600, red X / green arrow)
Models: CD350 / CD600 Indications: red cross, green arrow (2-aspect-in-1 or 3-aspect-in-1) Mounting: single side / double side LED: ultra high brightness, tested per CIE standard Feedback: relay feedback electric-level signal to control center PLC Enclosure: weather-proof
Electronic Toll Collection Sign (P4.75 dual color)
Pixel pitch: 4.75 mm; LED 1R1G Display: 610×305 mm, 128×64 pixels (module 64×32) Luminance: avg ≥2800 cd/m² Power: MEANWELL; input AC 220 V ±15%, 50 Hz ±2% Housing: cold-rolled steel; protection IP65 Mounting: hanging or column Communication: RS232/RS485; protocol NTCIP / SDK MTBF: ≥100,000 h; temperature -40~+60°C, RH ≤98% Display: license plate No. / vehicle weight / overload info / toll fee; sound & light alarm; red cross / green arrow
Self-Drilling Hollow Anchor Bar R32L, R-Thread (OD 32 mm x ID 22 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 32 mm Inner diameter: 22 mm Cross-sectional area: 343 mm2 Ultimate load: 250 kN Load at 0.2% yield: 200 kN Unit weight: 2.70 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R32N, R-Thread (OD 32 mm x ID 20 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 32 mm Inner diameter: 20 mm Cross-sectional area: 363 mm2 Ultimate load: 280 kN Load at 0.2% yield: 230 kN Unit weight: 2.85 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R32S, R-Thread (OD 32 mm x ID 17 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 32 mm Inner diameter: 17 mm Cross-sectional area: 446 mm2 Ultimate load: 360 kN Load at 0.2% yield: 280 kN Unit weight: 3.50 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R32SS, R-Thread (OD 32 mm x ID 14 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 32 mm Inner diameter: 14 mm Cross-sectional area: 516 mm2 Ultimate load: 400 kN Load at 0.2% yield: 300 kN Unit weight: 4.05 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R38N, R-Thread (OD 38 mm x ID 20 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 38 mm Inner diameter: 20 mm Cross-sectional area: 700 mm2 Ultimate load: 500 kN Load at 0.2% yield: 400 kN Unit weight: 5.5 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R38/550, R-Thread (OD 38 mm x ID 22.5 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 38 mm Inner diameter: 22.5 mm Cross-sectional area: 611 mm2 Ultimate load: 550 kN Load at 0.2% yield: 450 kN Unit weight: 4.80 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R38/660, R-Thread (OD 38 mm x ID 19.3 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 38 mm Inner diameter: 19.3 mm Cross-sectional area: 764 mm2 Ultimate load: 660 kN Load at 0.2% yield: 530 kN Unit weight: 6.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R51L, R-Thread (OD 51 mm x ID 34 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 51 mm Inner diameter: 34 mm Cross-sectional area: 892 mm2 Ultimate load: 660 kN Load at 0.2% yield: 540 kN Unit weight: 7.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R51N, R-Thread (OD 51 mm x ID 30.6 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 51 mm Inner diameter: 30.6 mm Cross-sectional area: 1070 mm2 Ultimate load: 800 kN Load at 0.2% yield: 630 kN Unit weight: 8.4 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R51/950, R-Thread (OD 51 mm x ID 30.2 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 51 mm Inner diameter: 30.2 mm Cross-sectional area: 1146 mm2 Ultimate load: 950 kN Load at 0.2% yield: 760 kN Unit weight: 9.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T30/16, T-Thread (OD 30 mm x ID 16 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 30 mm Inner diameter: 16 mm Cross-sectional area: 343 mm2 Ultimate load: 220 kN Load at 0.2% yield: 180 kN Unit weight: 2.70 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T40/20, T-Thread (OD 40 mm x ID 20 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 40 mm Inner diameter: 20 mm Cross-sectional area: 739 mm2 Ultimate load: 540 kN Load at 0.2% yield: 430 kN Unit weight: 5.80 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T52/26, T-Thread (OD 52 mm x ID 26 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 52 mm Inner diameter: 26 mm Cross-sectional area: 1274 mm2 Ultimate load: 929 kN Load at 0.2% yield: 730 kN Unit weight: 10.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T73/53, T-Thread (OD 73 mm x ID 53 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 73 mm Inner diameter: 53 mm Cross-sectional area: 1681 mm2 Ultimate load: 1160 kN Load at 0.2% yield: 970 kN Unit weight: 13.2 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T76N, T-Thread (OD 76 mm x ID 51 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 76 mm Inner diameter: 51 mm Cross-sectional area: 2076 mm2 Ultimate load: 1600 kN Load at 0.2% yield: 1200 kN Unit weight: 16.30 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar TR32L, TR-Thread (OD 32 mm x ID 22 mm)
Thread type: TR (mates with R thread under ISO 10208) Outer diameter: 32 mm Inner diameter: 22 mm Cross-sectional area: 343 mm2 Ultimate load: 250 kN Load at 0.2% yield: 200 kN Unit weight: 2.70 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar TR38/660, TR-Thread (OD 38 mm x ID 19.3 mm)
Thread type: TR (mates with R thread under ISO 10208) Outer diameter: 38 mm Inner diameter: 19.3 mm Cross-sectional area: 764 mm2 Ultimate load: 660 kN Load at 0.2% yield: 530 kN Unit weight: 6.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar TR51/950, TR-Thread (OD 51 mm x ID 30.2 mm)
Thread type: TR (mates with R thread under ISO 10208) Outer diameter: 51 mm Inner diameter: 30.2 mm Cross-sectional area: 1146 mm2 Ultimate load: 950 kN Load at 0.2% yield: 760 kN Unit weight: 9.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R32/580, Ultra-Tensile (OD 32 mm x ID 12 mm)
Thread type: R Outer diameter: 32 mm Inner diameter: 12 mm Cross-sectional area: 567 mm2 Ultimate load: 580 kN Load at 0.2% yield: 460 kN Tensile strength: > 1000 N/mm2 Yield strength: > 830 N/mm2 Unit weight: 4.45 kg/m Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R38/820, Ultra-Tensile (OD 38 mm x ID 18.5 mm)
Thread type: R Outer diameter: 38 mm Inner diameter: 18.5 mm Cross-sectional area: 790 mm2 Ultimate load: 820 kN Load at 0.2% yield: 650 kN Tensile strength: > 1000 N/mm2 Yield strength: > 830 N/mm2 Unit weight: 6.2 kg/m Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R51/1200, Ultra-Tensile (OD 50 mm x ID 26 mm)
Thread type: R Outer diameter: 50 mm Inner diameter: 26 mm Cross-sectional area: 1223 mm2 Ultimate load: 1200 kN Load at 0.2% yield: 1000 kN Tensile strength: > 1000 N/mm2 Yield strength: > 830 N/mm2 Unit weight: 9.6 kg/m Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T76/2200, Ultra-Tensile (OD 76 mm x ID 51.2 mm)
Thread type: T Outer diameter: 76 mm Inner diameter: 51.2 mm Cross-sectional area: 2254 mm2 Ultimate load: 2200 kN Load at 0.2% yield: 1700 kN Tensile strength: > 1100 N/mm2 Yield strength: > 900 N/mm2 Unit weight: 17.7 kg/m Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Stainless Self-Drilling Hollow Anchor Bar SSTR32/360 (OD 32 mm x ID 19 mm)
Thread type: R Outer diameter: 32 mm Inner diameter: 19 mm Cross-sectional area: 407 mm2 Ultimate load: 360 kN Load at 0.2% yield: 280 kN Unit weight: 3.2 kg/m Steel grades: 1.4462 / 304 / 316 (EN 10088-1 / ASTM A276 / GB/T 20878) Optional elongation: A200mm >= 6% / Ag >= 5% / Agt >= 2.5% / A100mm >= 6%
Stainless Self-Drilling Hollow Anchor Bar SSTR38/660 (OD 38 mm x ID 20 mm)
Thread type: R Outer diameter: 38 mm Inner diameter: 20 mm Cross-sectional area: 732 mm2 Ultimate load: 660 kN Load at 0.2% yield: 525 kN Unit weight: 5.75 kg/m Steel grades: 1.4462 / 304 / 316 (EN 10088-1 / ASTM A276 / GB/T 20878) Optional elongation: A200mm >= 6% / Ag >= 5% / Agt >= 2.5% / A100mm >= 6%
Stainless Self-Drilling Hollow Anchor Bar SSTR51/930 (OD 51 mm x ID 32 mm)
Thread type: R Outer diameter: 51 mm Inner diameter: 32 mm Cross-sectional area: 1019 mm2 Ultimate load: 930 kN Load at 0.2% yield: 730 kN Unit weight: 8.0 kg/m Steel grades: 1.4462 / 304 / 316 (EN 10088-1 / ASTM A276 / GB/T 20878) Optional elongation: A200mm >= 6% / Ag >= 5% / Agt >= 2.5% / A100mm >= 6%
Self-Drilling Anchor Drill Bit EXX — Tungsten-Carbide Insert Cross Bit
Bit type: EXX, tungsten-carbide (TC) insert cross bit Applicable ground: soft to medium fractured rock formations Ground strength: > 70 MPa Connection: R-thread shank matched to bar diameter
Self-Drilling Anchor Drill Bit ESS — Tungsten-Carbide Insert Button Bit
Bit type: ESS, tungsten-carbide (TC) insert button bit Applicable ground: strong fractured rock formations Ground strength: > 70 MPa Connection: R-thread shank matched to bar diameter
Self-Drilling Anchor Drill Bit ES — Hardened Steel Button Bit
Bit type: ES, hardened steel button bit Applicable ground: weak cemented soil/sands, weak fractured rock, plain concrete Ground strength: < 70 MPa Connection: R-thread shank matched to bar diameter
Self-Drilling Anchor System Coupler with Central Stop
Type: coupler with central stop Function: bar extension (connecting bars during drilling) Size: matched to bar thread series (R25 - T130 per catalog diameter range)
Self-Drilling Anchor System Nut — Hex and Spherical
Type: hex nut + spherical nut Function: tensioning and locking of anchor bar Size: matched to bar thread series (R25 - T130 per catalog diameter range)
Self-Drilling Anchor System Bearing Plate
Type: square / round bearing plate Function: load distribution at structure surface Size: matched to bar diameter and project design
Self-Drilling Anchor System Centralizer
Type: anchor bar centralizer Function: bar centering in drilled hole Size: matched to bar diameter and hole diameter