Routes et ponts
71 produits au total
Matériaux de fondation et de chaussée, matériaux et équipements pour structures principales de ponts et tunnels, galeries techniques souterraines, équipements de sécurité routière et électromécaniques associés, au service des projets routiers, de ponts et de tunnels.
PVC-C Cable Conduit ID150 (Utility Tunnel)
Selected size: dn150 Nominal inner diameter 100-200mm, ring stiffness SN8/SN12/SN16 with wall thickness 4.0-13.0mm, belled end connection, 6m lengths (other forms on request), orange; matching long sweep bends, plugs and duct pillows.
PVC-C Cable Conduit ID200 (Utility Tunnel)
Selected size: dn200 Nominal inner diameter 100-200mm, ring stiffness SN8/SN12/SN16 with wall thickness 4.0-13.0mm, belled end connection, 6m lengths (other forms on request), orange; matching long sweep bends, plugs and duct pillows.
HDPE Double-Wall Corrugated Duct dn110 (Utility Tunnel)
Selected size: dn110 dn 63/75/90/110mm, ring stiffness SN6.3, 6m lengths, double-wall corrugated structure with smooth inner wall and low friction, coupled joint with gasket; black.
Class A/K12 High-Security Anti-Terrorism Rising Bollard (Standard Deep-Buried Hydraulic)
Diameter: 273±2mm Blocking Height: 1000mm Embedded Depth: 1556mm Dimensions: 1067*792*1556mm
Class A High-Security Anti-Terrorism Rising Bollard
Diameter: 273±2mm Blocking Height: 1000mm Embedded Depth: 1540mm Dimensions: 815*500*1540mm
Class B/K4 High-Security Anti-Terrorism Rising Bollard
Diameter: 219±2mm Blocking Height: 1000mm Embedded Depth: 1519mm Dimensions: 695.5*485*1519mm
Class D Anti-Terrorism Rising Bollard
Diameter: 219±2mm Blocking Height: 600mm Embedded Depth: 1150mm Dimensions: φ400*1150mm
Class D Dual-Section Shallow-Buried Rising Bollard
Diameter: 219/273±2mm Blocking Height: 600mm Embedded Depth: 530mm Dimensions: 470*775*530mm
Class D Shallow-Buried Rising Bollard
Diameter: 219±2mm Blocking Height: 600mm Embedded Depth: 800mm Dimensions: φ400*800mm
Class E fully automatic retractable bollard
Diameter: 219±2mm Blocking height: 600mm Embedded depth: 1129mm Dimensions: φ400*1129mm
Class B standard road blocker
Blocking height: 600 mm Blocking width: 3000–6000 mm Embedded depth: 880 mm Dimensions: (blocking width + 180) × 1260 × 880 mm
Class B/K4 anti-ram barrier gate
Blocking width: 3–8 m Lifting/lowering speed: 4–14 s Drive mode: fully automatic/manual Center blocking height: 900 mm
Speed bump-type tire deflator
Equipment width: 500 mm Spike plate thickness: 10 mm Dimensions: (blocking width + 490) × 500 × 68 mm Blocking width: 1–8 m
In-ground tire deflator
Equipment width: 500 mm Spike plate thickness: 10 mm Dimensions: (blocking width + 554) × 500 × 68 mm Blocking width: 1–8 m
Light-duty tire deflator
Equipment width: 400 mm Spike plate thickness: 8 mm Dimensions: 1000 × 400 × 160 mm Blocking width: 1000 mm
LED Street Light 150W (GT10 series, 3030 LED)
Power: 150 W Luminous flux: 22500 lm (140-150 lm/W class) LED: 3030 package (5050 optional) CCT: 2200-2500K (amber) / 3000-4000K (WW) / 4000-5000K (NW) / 5000-6000K (CW) CRI: ≥70 Beam angle: 150°×80° (T2M/T3M anti-glare options) Input: 100-240 VAC, 47-63 Hz Operating temperature: -40~+45°C (storage -40~+75°C) Housing: aluminum alloy, stainless steel fasteners, tempered glass, optical PC lens Protection: IP66, IK08 Lifespan: >100,000 h
LED Street Light 150W (G9 series, high efficacy)
Power: 150 W Luminous flux: 24000 lm (≥150-160 lm/W class) CCT: 3000±300K (WW) / 4000±300K (NW) / 5700±300K (CW) CRI: ≥70 Beam angle: 160°×85° / 160°×95° Input: 100-240 VAC, 47-63 Hz Operating temperature: -30~+60°C Protection: IP67, IK10 Lifespan: >100,000 h
LED Street Light 60W (G7 series)
Power: 60 W Luminous flux: 9000 lm (≥150 lm/W) CCT: 3000±200K / 4000±300K / 5700±300K CRI: ≥70 Beam angle: 155°×75° / 150°×80° Input: 100-240 VAC, 47-63 Hz Operating temperature: -30~+50°C Protection: IP67, IK10 Lifespan: >100,000 h
LED Street Light 80W (G5 series, NEMA photocell)
Power: 80 W Luminous flux: 11600 lm (140-145 lm/W) CCT: 3000±300K / 4000±300K / 5000±300K / 5700±300K CRI: ≥70 Beam angle: 150°×50° (T2M/T3M/T5M distributions) Input: 200-240 VAC, 47-63 Hz Operating temperature: -40~+55°C Housing: die-cast aluminum + optical PC Protection: IP66, IK08 Lifespan: >100,000 h
LED Garden Street Light 50W (GD5 series)
Power: 50 W Luminous flux: 6250 lm (≥125 lm/W) LEDs: 96 pcs CCT: 3000±200K / 4000±300K / 5700±300K CRI: ≥70 Beam angle: T1 / T2M / T3M / T5M distributions Input: 100-240 VAC Operating temperature: -30~+40°C Protection: IP66, IK08 Lifespan: >100,000 h
Solar LED Street Light 150W (S7 series, split PV)
Power: 150 W Luminous flux: 15000 lm (100-185 lm/W) PV module: 300 W mono Battery: LiFePO4 1229 Wh CCT: 4000±300K / 5000±300K / 5700±300K CRI: ≥70 Autonomy: 3 days (12 h/day) after full charge; PV efficiency 20-23% Control: microwave sensor / time control / remote Protection: IP66, IK10 Lifespan: >100,000 h
Solar LED Street Light 40W (S6 series, all-in-one)
Power: 40 W Luminous flux: 4000 lm PV module: 48 W Battery: LiFePO4 230 Wh CCT: 3000K (WW) / 4000K (NW) / 5700K (CW) CRI: >70 Charging: 4-6 h; autonomy: 3 days intelligent mode + 4 days low-brightness mode Control: PIR motion sensor + light control Beam angle: 150°×70° Operating temperature: -10~+50°C Housing: aluminum + stainless steel + PC Protection: IP66, IK09 Lifespan: >100,000 h
Solar LED Street Light 120W (S5B series)
Power: 120 W Luminous flux: 12000 lm (100/200 lm/W class) PV module: 151 W mono Battery: LiFePO4 768 Wh CCT: 3000K (WW) / 4000K (NW) / 5700K (CW) CRI: >70 Charging: <6 h; autonomy: 3 days Control: motion / PIR Beam angle: 155°×70° (T2M/T3M bat-wing, anti-UV) Protection: IP66, IK10 Lifespan: >100,000 h
LED Tunnel Light 150W (T11 series)
Power: 150 W (20-100 W and 120-270 W sizes) Luminous flux: 25500 ±5% lm (no-glass 165 lm/W; glass 150 lm/W) LED: 5050 package (2835 optional) CCT: 3000±300K / 4000±300K / 5000±300K / 5700±300K CRI: ≥70 Beam angle: 75°×145° (2835) / 65°×145° (5050) Input: 47-63 Hz (100-240 VAC class) Operating temperature: -30~+45°C (storage -40~+60°C) Housing: aluminum alloy + optical PC + tempered glass + stainless steel Protection: IP66, IK10 Lifespan: >100,000 h
LED Tunnel Light 200W (T10 series)
Power: 200 W Luminous flux: 34000 ±5% lm (170 lm/W class; 165 lm/W at 100 W) LED: 5050 package CCT: 3000±300K / 4000±300K / 5000±300K / 5700±300K CRI: ≥70 Beam angle: 75°×145° (2835) / 65°×145° (5050) Input: 47-63 Hz (100-240 VAC class) Operating temperature: -30~+45°C (storage -40~+60°C) Protection: IP66, IK10 Lifespan: >100,000 h
LED Tunnel Light 100W (T9 series)
Power: 100 W (range 40-450 W) Luminous flux: 14000 ±5% lm (≥150 lm/W at 40-120 W; ≥140 lm/W at 150-450 W) CCT: 3000±300K / 4000±300K / 5700±300K CRI: >70 Beam angle: 85°×155° / 102°×155° / 125°×148° / 23°×105° Input: 100-240 VAC, 47-63 Hz Operating temperature: -30~+60°C Housing: aluminum alloy + optical PC + tempered glass + stainless steel Protection: IP67, IK10 Lifespan: >100,000 h
Full Matrix Variable Message Sign P16 (RGB SMD, gantry type)
Pixel pitch: 16 mm (P10/P12/P16/P20/P25/P31.25 available) LED: RGB SMD 3-in-1, full matrix Module: 256×256 mm, 16×16 dots; density 3906 dots/m² Luminance: L3 class (white >12400 cd/m², red >3100 cd/m²); brightness ratio 20:1 at 40000 lux Chromaticity: C2; beam width: R3 (B1-B7 configurable); contrast 20:1 Brightness control: 32 grades, auto photosensor, fanless Communication: RJ45, RS232/RS485, TCP/IP, 3G/4G Protocols: NTCIP, MODBUS, XML, Profibus, DGT Power: 110-240 VAC 50/60 Hz; max 168 W/m², avg 78 W/m² Cabinet: aluminum alloy; front/back IP66 (P33); pollution degree D4 Temperature: T1/T2&T3, -40~+60°C, RH <95% EMC: EN 55032; viewing/legibility >200 m
Full Matrix Variable Message Sign P25 (RGB SMD, gantry type)
Pixel pitch: 25 mm (P10/P12/P16/P20/P25/P31.25 available) LED: RGB SMD 3-in-1, full matrix Module: 200×200 mm, 8×8 dots; density 2500 dots/m² Luminance: L3 class (white >12400 cd/m², red >3100 cd/m²) Chromaticity: C2; beam width: R3 (B1-B7 configurable); contrast 20:1 Brightness control: 32 grades, auto photosensor, fanless Communication: RJ45, RS232/RS485, TCP/IP, 3G/4G Protocols: NTCIP, MODBUS, XML, Profibus, DGT Power: 110-240 VAC 50/60 Hz; max 95 W/m², avg 43 W/m² Cabinet: aluminum alloy; front/back IP66 (P33); pollution degree D4 Temperature: T1/T2&T3, -40~+60°C, RH <95% EMC: EN 55032; viewing/legibility >200 m
Variable Legend Sign P25 (full color pictogram panel)
Pixel pitch: 25 mm (P20/P25/P31.25 available) LED: RGB, NICHIA / EPISTAR Module: 320×160 mm, 16×8 dots; density 1600 dots/m² (P25) Luminance: L3 / L3* / L3(T); chromaticity C1/C2; beam width B1-B7 Brightness control: 32 grades auto/manual; viewing distance >200 m Power: 110-230 VAC; max 95 W/m², avg 43 W/m² (P25) Protection: P3/IP66; temperature -40~+60°C Communication: RS232/RS485, TCP-IP, GPRS Protocols: NTCIP, XML
LED Predefined Sign 1200×1200 mm (variable speed limit / lane signal)
Panel size: 1200×1200×150 mm (customizable) Legend: EN 12966 character height; circle diameter 900-1000 mm Display: white digits, red circle, red cross, green arrow, yellow flashers (4 corners) LED: NICHIA / EPISTAR Luminance: L3 / L3* / L3(T); chromaticity C1/C2; beam width B1-B7 Cabinet: aluminum alloy (60 kg/m²) or steel (65 kg/m²) Brightness control: 32 grades Power: 110-230 VAC, ≤45 W Protection: P3/IP66; temperature -40~+60°C Communication: RS232/RS485, TCP-IP, GPRS Protocols: MODBUS, NTCIP
Character Matrix VMS (P25, 1-4 lines)
Lines: 1-4; characters per line: 8/12/15/16/18/21 by character height Pixel pitch: 20/25/45/66 mm; character height: 100-450 mm Luminance: L3 / L3* / L3(T); chromaticity C2; beam width B1-B7 Standard: EN 12966; protection P3/IP66; pollution D4 Brightness: 32 levels auto/manual; microprocessor diagnostic Cabinet: aluminum / galvanized steel Power: 12/24 V DC or 110-230/380 V AC Communication: RS232/RS485/RJ45, 3G/4G
Traffic Guiding Sign P10 (graphic route display, env monitoring option)
Pixel pitch: P10 LED: 1R1G1B Luminous intensity: 6000 cd/m² Viewing distance: 30-200 m Driving: 1/4 constant current Power: ≤50 W; input 180-250 VAC Communication: GPRS / TCP-IP LED lifetime: ≥100000 h; temperature -40~+60°C
Parking Guidance Sign (P8, R/G/A/W)
Colors: Red / Green / Amber / White LED: SMD outdoor or optical lens design Pixel pitch: 6 mm / 8 mm / 10 mm Viewing distance: approx. 100 m; viewing angle 120°/120° Features: ultra reflective film, multi-language, high brightness Cabinet: aluminum alloy or stainless steel, protection IP56; panels detachable Communication: RS232/RS485, 3G/4G
Portable VMS Trailer Type II (P16/P20, 2.0×1.5 m, solar)
Type II display: 2.0 m × 1.5 m; resolution 120×80 pixels Pixel pitch: P16 / P20 (Type I: P10/P12 1.5×1.0 m 96×64; Type III: P25/P31.25 2.8×1.8 m) LED: RGB (RGBWA) Power: solar — 140 W PV panels ×2/3, 12 V 120 Ah batteries ×2/3 with solar controller (AC option) Structure: hot-dip galvanized, anti-UV powder coating, retractable draw bar, lifting mechanism electric/hydraulic Communication: RS232/LAN/4G/5G, 3G/4G module, GPS location Control: remote ITS / computer / mobile; worksheet display IP65 Cabinet: cold-rolled steel / aluminum / stainless steel; constant current driving
Speed Warning Sign (3-digit, microwave radar, green/red)
Display: 3 digits, 24×16 pixels, dual color (green & red) Target speed setting: 5-240 km/h Radar: microwave, accuracy ±1 kph; lanes: 2-5 Viewing: 5-50 m; angle ±60° Communication: RS232/RS485/LAN Protocols: NTCIP / MODBUS Power: AC 220 V / DC / solar options Temperature: -40~+60°C, RH 10-100%
Vehicle Actuated Sign VAS (solar, 4G)
Luminance: 6500 cd/m², auto-dimming Display: 660×710 mm; marine grade aluminum enclosure (6062 H32), IP65 Viewing angle: H-30°/V-30° Radar: 10-255 km/h, detection ~300 m, response 5 ms Power: solar panel + battery or mains; 12 V DC Memory: 256 M + 2 G; data buffer 90 days; daily report (Excel); I/O module; 4G modem; Android app control Temperature: -25~+60°C; service life 15 years Compliance: AS/NZS 3000, AS 5158, AS/CA S009:2013
Radar Speed Warning Sign P25 (full color, 4G)
Pixel pitch: P25; full color RGB-in-1 SMD with optical lens Luminance: 12000 cd/m² max white, auto-dimming photosensor Display: 610×410 mm, 24×16 pixels; cabinet 760×650×120 mm aluminum alloy Viewing angle: H-30°/V-30° Radar: 5-255 km/h, accuracy ±1 kph, detection ~300 m, response 5 ms Power: AC 85-140 V / 180-260 V or solar; working 12 V DC; avg 50 W Memory: 256 M + 2 G; daily report Excel; data buffer 90 days; 4G module Temperature: -25~+60°C
Lane Control Sign (CD350/CD600, red X / green arrow)
Models: CD350 / CD600 Indications: red cross, green arrow (2-aspect-in-1 or 3-aspect-in-1) Mounting: single side / double side LED: ultra high brightness, tested per CIE standard Feedback: relay feedback electric-level signal to control center PLC Enclosure: weather-proof
Electronic Toll Collection Sign (P4.75 dual color)
Pixel pitch: 4.75 mm; LED 1R1G Display: 610×305 mm, 128×64 pixels (module 64×32) Luminance: avg ≥2800 cd/m² Power: MEANWELL; input AC 220 V ±15%, 50 Hz ±2% Housing: cold-rolled steel; protection IP65 Mounting: hanging or column Communication: RS232/RS485; protocol NTCIP / SDK MTBF: ≥100,000 h; temperature -40~+60°C, RH ≤98% Display: license plate No. / vehicle weight / overload info / toll fee; sound & light alarm; red cross / green arrow
Self-Drilling Hollow Anchor Bar R32L, R-Thread (OD 32 mm x ID 22 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 32 mm Inner diameter: 22 mm Cross-sectional area: 343 mm2 Ultimate load: 250 kN Load at 0.2% yield: 200 kN Unit weight: 2.70 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R32N, R-Thread (OD 32 mm x ID 20 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 32 mm Inner diameter: 20 mm Cross-sectional area: 363 mm2 Ultimate load: 280 kN Load at 0.2% yield: 230 kN Unit weight: 2.85 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R32S, R-Thread (OD 32 mm x ID 17 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 32 mm Inner diameter: 17 mm Cross-sectional area: 446 mm2 Ultimate load: 360 kN Load at 0.2% yield: 280 kN Unit weight: 3.50 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R32SS, R-Thread (OD 32 mm x ID 14 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 32 mm Inner diameter: 14 mm Cross-sectional area: 516 mm2 Ultimate load: 400 kN Load at 0.2% yield: 300 kN Unit weight: 4.05 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R38N, R-Thread (OD 38 mm x ID 20 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 38 mm Inner diameter: 20 mm Cross-sectional area: 700 mm2 Ultimate load: 500 kN Load at 0.2% yield: 400 kN Unit weight: 5.5 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R38/550, R-Thread (OD 38 mm x ID 22.5 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 38 mm Inner diameter: 22.5 mm Cross-sectional area: 611 mm2 Ultimate load: 550 kN Load at 0.2% yield: 450 kN Unit weight: 4.80 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R38/660, R-Thread (OD 38 mm x ID 19.3 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 38 mm Inner diameter: 19.3 mm Cross-sectional area: 764 mm2 Ultimate load: 660 kN Load at 0.2% yield: 530 kN Unit weight: 6.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R51L, R-Thread (OD 51 mm x ID 34 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 51 mm Inner diameter: 34 mm Cross-sectional area: 892 mm2 Ultimate load: 660 kN Load at 0.2% yield: 540 kN Unit weight: 7.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R51N, R-Thread (OD 51 mm x ID 30.6 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 51 mm Inner diameter: 30.6 mm Cross-sectional area: 1070 mm2 Ultimate load: 800 kN Load at 0.2% yield: 630 kN Unit weight: 8.4 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R51/950, R-Thread (OD 51 mm x ID 30.2 mm)
Thread type: R (ISO 10208 / ISO 1720) Outer diameter: 51 mm Inner diameter: 30.2 mm Cross-sectional area: 1146 mm2 Ultimate load: 950 kN Load at 0.2% yield: 760 kN Unit weight: 9.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T30/16, T-Thread (OD 30 mm x ID 16 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 30 mm Inner diameter: 16 mm Cross-sectional area: 343 mm2 Ultimate load: 220 kN Load at 0.2% yield: 180 kN Unit weight: 2.70 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T40/20, T-Thread (OD 40 mm x ID 20 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 40 mm Inner diameter: 20 mm Cross-sectional area: 739 mm2 Ultimate load: 540 kN Load at 0.2% yield: 430 kN Unit weight: 5.80 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T52/26, T-Thread (OD 52 mm x ID 26 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 52 mm Inner diameter: 26 mm Cross-sectional area: 1274 mm2 Ultimate load: 929 kN Load at 0.2% yield: 730 kN Unit weight: 10.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T73/53, T-Thread (OD 73 mm x ID 53 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 73 mm Inner diameter: 53 mm Cross-sectional area: 1681 mm2 Ultimate load: 1160 kN Load at 0.2% yield: 970 kN Unit weight: 13.2 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T76N, T-Thread (OD 76 mm x ID 51 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 76 mm Inner diameter: 51 mm Cross-sectional area: 2076 mm2 Ultimate load: 1600 kN Load at 0.2% yield: 1200 kN Unit weight: 16.30 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar TR32L, TR-Thread (OD 32 mm x ID 22 mm)
Thread type: TR (mates with R thread under ISO 10208) Outer diameter: 32 mm Inner diameter: 22 mm Cross-sectional area: 343 mm2 Ultimate load: 250 kN Load at 0.2% yield: 200 kN Unit weight: 2.70 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar TR38/660, TR-Thread (OD 38 mm x ID 19.3 mm)
Thread type: TR (mates with R thread under ISO 10208) Outer diameter: 38 mm Inner diameter: 19.3 mm Cross-sectional area: 764 mm2 Ultimate load: 660 kN Load at 0.2% yield: 530 kN Unit weight: 6.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar TR51/950, TR-Thread (OD 51 mm x ID 30.2 mm)
Thread type: TR (mates with R thread under ISO 10208) Outer diameter: 51 mm Inner diameter: 30.2 mm Cross-sectional area: 1146 mm2 Ultimate load: 950 kN Load at 0.2% yield: 760 kN Unit weight: 9.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R32/580, Ultra-Tensile (OD 32 mm x ID 12 mm)
Thread type: R Outer diameter: 32 mm Inner diameter: 12 mm Cross-sectional area: 567 mm2 Ultimate load: 580 kN Load at 0.2% yield: 460 kN Tensile strength: > 1000 N/mm2 Yield strength: > 830 N/mm2 Unit weight: 4.45 kg/m Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R38/820, Ultra-Tensile (OD 38 mm x ID 18.5 mm)
Thread type: R Outer diameter: 38 mm Inner diameter: 18.5 mm Cross-sectional area: 790 mm2 Ultimate load: 820 kN Load at 0.2% yield: 650 kN Tensile strength: > 1000 N/mm2 Yield strength: > 830 N/mm2 Unit weight: 6.2 kg/m Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar R51/1200, Ultra-Tensile (OD 50 mm x ID 26 mm)
Thread type: R Outer diameter: 50 mm Inner diameter: 26 mm Cross-sectional area: 1223 mm2 Ultimate load: 1200 kN Load at 0.2% yield: 1000 kN Tensile strength: > 1000 N/mm2 Yield strength: > 830 N/mm2 Unit weight: 9.6 kg/m Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T76/2200, Ultra-Tensile (OD 76 mm x ID 51.2 mm)
Thread type: T Outer diameter: 76 mm Inner diameter: 51.2 mm Cross-sectional area: 2254 mm2 Ultimate load: 2200 kN Load at 0.2% yield: 1700 kN Tensile strength: > 1100 N/mm2 Yield strength: > 900 N/mm2 Unit weight: 17.7 kg/m Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Stainless Self-Drilling Hollow Anchor Bar SSTR32/360 (OD 32 mm x ID 19 mm)
Thread type: R Outer diameter: 32 mm Inner diameter: 19 mm Cross-sectional area: 407 mm2 Ultimate load: 360 kN Load at 0.2% yield: 280 kN Unit weight: 3.2 kg/m Steel grades: 1.4462 / 304 / 316 (EN 10088-1 / ASTM A276 / GB/T 20878) Optional elongation: A200mm >= 6% / Ag >= 5% / Agt >= 2.5% / A100mm >= 6%
Stainless Self-Drilling Hollow Anchor Bar SSTR38/660 (OD 38 mm x ID 20 mm)
Thread type: R Outer diameter: 38 mm Inner diameter: 20 mm Cross-sectional area: 732 mm2 Ultimate load: 660 kN Load at 0.2% yield: 525 kN Unit weight: 5.75 kg/m Steel grades: 1.4462 / 304 / 316 (EN 10088-1 / ASTM A276 / GB/T 20878) Optional elongation: A200mm >= 6% / Ag >= 5% / Agt >= 2.5% / A100mm >= 6%
Stainless Self-Drilling Hollow Anchor Bar SSTR51/930 (OD 51 mm x ID 32 mm)
Thread type: R Outer diameter: 51 mm Inner diameter: 32 mm Cross-sectional area: 1019 mm2 Ultimate load: 930 kN Load at 0.2% yield: 730 kN Unit weight: 8.0 kg/m Steel grades: 1.4462 / 304 / 316 (EN 10088-1 / ASTM A276 / GB/T 20878) Optional elongation: A200mm >= 6% / Ag >= 5% / Agt >= 2.5% / A100mm >= 6%
Self-Drilling Anchor Drill Bit EXX — Tungsten-Carbide Insert Cross Bit
Bit type: EXX, tungsten-carbide (TC) insert cross bit Applicable ground: soft to medium fractured rock formations Ground strength: > 70 MPa Connection: R-thread shank matched to bar diameter
Self-Drilling Anchor Drill Bit ESS — Tungsten-Carbide Insert Button Bit
Bit type: ESS, tungsten-carbide (TC) insert button bit Applicable ground: strong fractured rock formations Ground strength: > 70 MPa Connection: R-thread shank matched to bar diameter
Self-Drilling Anchor Drill Bit ES — Hardened Steel Button Bit
Bit type: ES, hardened steel button bit Applicable ground: weak cemented soil/sands, weak fractured rock, plain concrete Ground strength: < 70 MPa Connection: R-thread shank matched to bar diameter
Self-Drilling Anchor System Coupler with Central Stop
Type: coupler with central stop Function: bar extension (connecting bars during drilling) Size: matched to bar thread series (R25 - T130 per catalog diameter range)
Self-Drilling Anchor System Nut — Hex and Spherical
Type: hex nut + spherical nut Function: tensioning and locking of anchor bar Size: matched to bar thread series (R25 - T130 per catalog diameter range)
Self-Drilling Anchor System Bearing Plate
Type: square / round bearing plate Function: load distribution at structure surface Size: matched to bar diameter and project design
Self-Drilling Anchor System Centralizer
Type: anchor bar centralizer Function: bar centering in drilled hole Size: matched to bar diameter and hole diameter