Réseaux municipaux
Matériaux d'ingénierie pour réseaux d'assainissement · 19 produits
Stormwater-sewage separation uses HDPE double-wall corrugated pipes, RC pipes, manhole covers, and storm grates, checked against ring stiffness and cover depth.
PVC-U Sewer Pipe (dn250)
Material: rigid PVC-U Size: dn250 x 6.2 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
PVC-U Sewer Pipe (dn315)
Material: rigid PVC-U Size: dn315 x 7.7 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
PVC-U Sewer Pipe (dn400)
Material: rigid PVC-U Size: dn400 x 9.8 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
PVC-U Sewer Pipe (dn500)
Material: rigid PVC-U Size: dn500 x 12.3 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
PVC-U Sewer Pipe (dn630)
Material: rigid PVC-U Size: dn630 x 15.4 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
Ductile Iron Sewage Pipe DN600, High-Alumina Cement Lining with Epoxy Resin Exterior Coating
DN: 600 mm (catalogue T-type joint pipe range DN80-DN2600 applies) Internal lining: high-alumina cement mortar External coating: epoxy resin, thickness >= 200 um Medium conditions: strong acid and alkali sewage, pH 4-12 Applications per catalogue: industrial effluent, domestic wastewater transmission pipelines Joint: T-type Standards: EN 598
Ductile Iron Jacking Pipe DN1200 (Non-Excavation)
DN: 1200 mm (jacking pipe per catalogue competitive-products range) Characteristics per catalogue: high strength, bears large jacking force Construction method: non-excavation (no damage to surface buildings, no impact on traffic) Reference application: DN1200 jacking pipe, Jiangxi province (catalogue project performance) Standards: ISO 2531
Polymer concrete drainage pipe DN300 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN300 Inner diameter: 300 mm Wall thickness: 19 mm Length: 2500 mm Reference weight: 92 kg
Polymer concrete drainage pipe DN500 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN500 Inner diameter: 500 mm Wall thickness: 34 mm Length: 2500 mm Reference weight: 326 kg
Polymer concrete drainage pipe DN800 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN800 Inner diameter: 800 mm Wall thickness: 52 mm Length: 4000 mm Reference weight: 799 kg
Polymer concrete drainage pipe DN1000 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN1000 Inner diameter: 1000 mm Wall thickness: 63 mm Length: 4000 mm Reference weight: 1230 kg
Polymer concrete drainage pipe DN1350 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN1350 Inner diameter: 1350 mm Wall thickness: 84 mm Length: 6000 mm Reference weight: 1637 kg
Polymer concrete drainage pipe DN1800 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN1800 Inner diameter: 1800 mm Wall thickness: 109 mm Length: 6000 or customized mm Reference weight: 2832 kg
Polymer Concrete Jacking Pipe DN300 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN300 (heavy-wall) Pipe Section Wall Thickness: 37 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 80 t Minimum Allowable Deflection Angle: 3°
Polymer Concrete Jacking Pipe DN400 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN400 (heavy-wall) Pipe Section Wall Thickness: 43 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 120 t Minimum Allowable Deflection Angle: 3°
Polymer Concrete Jacking Pipe DN600 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN600 (heavy-wall) Pipe Section Wall Thickness: 55 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 240 t Minimum Allowable Deflection Angle: 3°
Polymer Concrete Jacking Pipe DN800 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN800 (heavy-wall) Pipe Section Wall Thickness: 70 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 420 t Minimum Allowable Deflection Angle: 1.5°
Polymer Concrete Jacking Pipe DN1000 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN1000 (heavy-wall) Pipe Section Wall Thickness: 82 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 640 t Minimum Allowable Deflection Angle: 1.5°
Polymer Concrete Jacking Pipe DN1500 (Extra-Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN1500 (extra-heavy-wall) Pipe Section Wall Thickness: 150 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP