Réseaux municipaux
71 produits au total
Matériaux et équipements pour canalisations d'eau potable et d'assainissement, de gaz, de chauffage, d'électricité et de communication, galeries techniques intégrées et ouvrages annexes de stations et regards, couvrant les projets de réseaux souterrains urbains.
PE100 Water Pipe (SDR17 / PN10)
Material: PE100 polyethylene Pressure rating: PN10 (SDR17) Common sizes: dn110×6.6 / dn160×9.5 / dn200×11.9 mm Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable) Length: 5.8m / 6m straight; coil form for small diameters
PVC-U Double-Wall Corrugated Duct
Standard: YD/T 841.3-2016 Ring stiffness: SN6.3 Nominal diameter: dn63–dn200 mm Length: 6m (customizable) Joint: gasketed socket
PE Multi-Hole Duct
Standard: YD/T 841.5-2016 Structure: 4 / 5 / 7 holes Size: 32×2.2/2.0 mm (32mm inner diameter) Length: 6m / 5.8m Accessories: couplings, plugs
MPP Trenchless Power Cable Conduit
Standard: DL/T 802.7-2010 Ring stiffness: SN24 / SN32 / SN40 / SN50 Nominal inner diameter: dn98–dn250 mm Wall thickness: 6–22 mm Length: 6m (customizable) Color: orange
PVC-U Underground Power Cable Duct
Standard: DL/T 802.3-2007 Ring stiffness: SN16 / SN24 / SN32 Nominal inner diameter: dn100–dn200 mm Wall thickness: 4.0–13.0 mm Length: 6m Joint: belled socket, with duct pillows
PE Sub-Duct (Communication Coil Pipe)
dn 25/32/40mm, ring stiffness SN6.3/SN8/SN16, supplied in coils of 100m, 200m or 300m; colors white, yellow, black, red or blue, other colors on request.
PE Solid-Wall Communication Duct
dn 50-160mm, ring stiffness SN6.3/SN8/SN16, 6m lengths (other forms on request), butt fusion joint or socket-weld joint; colors white, yellow, black or blue.
PE Single-Wall Spiral Duct
Nominal diameter 110-200mm: 110mm in SN4/SN8, 125/140mm in SN6.3, 160/180/200mm in SN4; 6m lengths (other forms on request), spiral socket connection without auxiliary equipment, white or black.
PVC Solid-Wall Communication Duct
dn 40-160mm, ring stiffness SN4/SN6.3/SN8/SN12.5/SN16 with wall thickness 1.6-6.2mm, 6m lengths (other forms on request), flaring adhesive (solvent-cement) joint.
HDPE Double-Wall Corrugated Communication Duct
dn 63/75/90/110mm, ring stiffness SN6.3, 6m lengths, double-wall corrugated structure with smooth inner wall and low friction, coupled joint with gasket; black.
PVC-U Honeycomb (Multi-Hole) Duct
32mm inner diameter honeycomb multi-hole duct in 3/4/5/7-hole versions (size 32x2.0/1.6x3/4/5/7), 6m lengths; matching couplings (32x3/4/5/7) and plug available.
PVC-U Honeycomb Duct (Type II, SVFY Series)
SVFY 28/33 series buried telecommunication honeycomb conduit in 3/5/7-hole versions, inner diameter 28/33mm; matching Type II couplings and plugs.
PVC-U Grill (Grid) Duct
Grid (grill) multi-hole duct in 4/5/6/9-hole versions, inner diameter 28/33/42(42.8)mm, wall 1.6-2.8mm, 6m or 5.8m lengths; matching couplings and plugs.
PVC-U Grill Duct (Type II, SVSY Series)
SVSY series grid duct in 3/4/6/9-hole versions, inner diameter 28-50mm, outer wall thickness 2.0-3.2mm and inner wall 1.6-2.6mm; matching Type II duct couplings and plugs.
PVC-C Power Cable Conduit (OD Series)
OD 75-219mm with wall thickness 3.0-9.5mm (75x3.0/5.0, 90x4.0, 110x3.2/4.0/5.0, 139x5.0/6.0, 160x4.0/5.0, 167x6.0/8.0, 192x6.5/8.5, 200x8.5, 219x7.0/9.5), orange, plain end or belled end, 6m/5.8m lengths, solvent-weld joint; high temperature resistance, oxygen index >= 40; matching long sweep bends, plugs, couplings and duct pillows available.
PVC-C Power Cable Conduit (ID Series)
Nominal inner diameter 100-200mm, ring stiffness SN8/SN12/SN16 with wall thickness 4.0-13.0mm, belled end connection, 6m lengths (other forms on request), orange; matching long sweep bends, plugs and duct pillows.
Duct Pillow (Buried Duct Spacer)
PE and PVC duct pillows matching duct sizes 50-219mm (PE pillow 50/63/75/90/110/125/160/167; PVC pillow 75/90/100/110/125/139/150/160/167/175/180/192/200/219). One pillow every 1.5m and 0.5m from each joint, locked by a special pillow pin; PE pillow also usable for PVC pipe.
PVC-U Sewer Pipe (dn250)
Material: rigid PVC-U Size: dn250 x 6.2 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
PVC-U Sewer Pipe (dn315)
Material: rigid PVC-U Size: dn315 x 7.7 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
PVC-U Sewer Pipe (dn400)
Material: rigid PVC-U Size: dn400 x 9.8 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
PVC-U Sewer Pipe (dn500)
Material: rigid PVC-U Size: dn500 x 12.3 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
PVC-U Sewer Pipe (dn630)
Material: rigid PVC-U Size: dn630 x 15.4 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: belled socket (rubber ring / solvent cement)
PE Solid-Wall Duct dn110 (Utility Tunnel)
Selected size: dn110 dn 50-160mm, ring stiffness SN6.3/SN8/SN16, 6m lengths (other forms on request), butt fusion joint or socket-weld joint; colors white, yellow, black or blue.
PE Solid-Wall Duct dn160 (Utility Tunnel)
Selected size: dn160 dn 50-160mm, ring stiffness SN6.3/SN8/SN16, 6m lengths (other forms on request), butt fusion joint or socket-weld joint; colors white, yellow, black or blue.
PVC-C Cable Conduit OD160 (Utility Tunnel)
Selected size: dn160 OD 75-219mm with wall thickness 3.0-9.5mm (75x3.0/5.0, 90x4.0, 110x3.2/4.0/5.0, 139x5.0/6.0, 160x4.0/5.0, 167x6.0/8.0, 192x6.5/8.5, 200x8.5, 219x7.0/9.5), orange, plain end or belled end, 6m/5.8m lengths, solvent-weld joint; high temperature resistance, oxygen index >= 40; matching long sweep bends, plugs, couplings and duct pillows available.
PE100 Water Pipe dn63 (SDR17 / PN10)
Material: PE100 polyethylene Size: dn63 x 3.8 mm Pressure rating: PN10 (SDR17) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn75 (SDR17 / PN10)
Material: PE100 polyethylene Size: dn75 x 4.5 mm Pressure rating: PN10 (SDR17) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn90 (SDR17 / PN10)
Material: PE100 polyethylene Size: dn90 x 5.4 mm Pressure rating: PN10 (SDR17) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn125 (SDR17 / PN10)
Material: PE100 polyethylene Size: dn125 x 7.4 mm Pressure rating: PN10 (SDR17) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn250 (SDR17 / PN10)
Material: PE100 polyethylene Size: dn250 x 14.8 mm Pressure rating: PN10 (SDR17) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn315 (SDR17 / PN10)
Material: PE100 polyethylene Size: dn315 x 18.7 mm Pressure rating: PN10 (SDR17) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn90 (SDR11 / PN16)
Material: PE100 polyethylene Size: dn90 x 8.2 mm Pressure rating: PN16 (SDR11) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn125 (SDR11 / PN16)
Material: PE100 polyethylene Size: dn125 x 11.4 mm Pressure rating: PN16 (SDR11) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn160 (SDR11 / PN16)
Material: PE100 polyethylene Size: dn160 x 14.6 mm Pressure rating: PN16 (SDR11) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn250 (SDR11 / PN16)
Material: PE100 polyethylene Size: dn250 x 22.7 mm Pressure rating: PN16 (SDR11) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn200 (SDR21 / PN8)
Material: PE100 polyethylene Size: dn200 x 9.6 mm Pressure rating: PN8 (SDR21) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn315 (SDR21 / PN8)
Material: PE100 polyethylene Size: dn315 x 15.0 mm Pressure rating: PN8 (SDR21) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
PE100 Water Pipe dn400 (SDR26 / PN6)
Material: PE100 polyethylene Size: dn400 x 15.3 mm Pressure rating: PN6 (SDR26) Length: 5.8m / 6m straight Standards: ISO 4427-2 / EN 12201-2 / GB/T 13663-2 Color: black with blue stripes (customizable)
Ductile Iron Pipe DN80 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 80 mm Spigot OD (DE): 98 mm Pressure class: K9 (min. hydrostatic test pressure 5.0 MPa for DN80-300) Unit weight of body: 12.2 kg/m Total weight per pipe (incl. socket): 77 kg Internal lining: cement mortar, 4.0 mm nominal / 2.5 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN150 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 150 mm Spigot OD (DE): 170 mm Pressure class: K9 (min. hydrostatic test pressure 5.0 MPa for DN80-300) Unit weight of body: 22.8 kg/m Total weight per pipe (incl. socket): 144 kg Internal lining: cement mortar, 4.0 mm nominal / 2.5 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN250 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 250 mm Spigot OD (DE): 274 mm Pressure class: K9 Unit weight of body: 40.1 kg/m Total weight per pipe (incl. socket): 255 kg Internal lining: cement mortar, 4.0 mm nominal / 2.5 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN350 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 350 mm Spigot OD (DE): 378 mm Pressure class: K9 (min. hydrostatic test pressure 4.0 MPa for DN350-600) Unit weight of body: 63.2 kg/m Total weight per pipe (incl. socket): 403 kg Internal lining: cement mortar, 5.0 mm nominal / 3.0 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN400 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 400 mm Spigot OD (DE): 429 mm Pressure class: K9 (min. hydrostatic test pressure 4.0 MPa for DN350-600) Unit weight of body: 75.5 kg/m Total weight per pipe (incl. socket): 482 kg Internal lining: cement mortar, 5.0 mm nominal / 3.0 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN600 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 600 mm Spigot OD (DE): 635 mm Pressure class: K9 (min. hydrostatic test pressure 4.0 MPa for DN350-600) Unit weight of body: 137.1 kg/m Total weight per pipe (incl. socket): 882 kg Internal lining: cement mortar, 5.0 mm nominal / 3.0 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN800 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 800 mm Spigot OD (DE): 842 mm Pressure class: K9 (min. hydrostatic test pressure 3.2 MPa for DN700-1000) Unit weight of body: 215.2 kg/m Total weight per pipe (incl. socket): 1394 kg Internal lining: cement mortar, 6.0 mm nominal / 3.5 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN1000 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 1000 mm Spigot OD (DE): 1048 mm Pressure class: K9 (min. hydrostatic test pressure 3.2 MPa for DN700-1000) Unit weight of body: 309.3 kg/m Total weight per pipe (incl. socket): 2017 kg Internal lining: cement mortar, 6.0 mm nominal / 3.5 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN1400 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 1400 mm Spigot OD (DE): 1462 mm Pressure class: K9 (min. hydrostatic test pressure 2.5 MPa for DN1100-2000) Unit weight of body: 547.3 kg/m Total weight per pipe (incl. socket): 3669 kg Internal lining: cement mortar, 9.0 mm nominal / 6.0 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN2000 K9, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 2000 mm Spigot OD (DE): 2082 mm Pressure class: K9 (min. hydrostatic test pressure 2.5 MPa for DN1100-2000) Unit weight of body: 1026.3 kg/m Total weight per pipe (incl. socket): 7043 kg Internal lining: cement mortar, 9.0 mm nominal / 6.0 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN2600 K9, T-type Joint, Cement Mortar Lining (Largest Size of the Range)
DN: 2600 mm Spigot OD (DE): 2702 mm Pressure class: K9 (min. hydrostatic test pressure 1.8 MPa for DN2200-2600) Unit weight of body: 1652.4 kg/m Total weight per pipe (incl. socket): 11408 kg Internal lining: cement mortar, 12.0 mm nominal / 7.0 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531
Ductile Iron Pipe DN300 K8, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 300 mm Spigot OD (DE): 326 mm Pressure class: K8 Unit weight of body: 45.3 kg/m Total weight per pipe (incl. socket): 290 kg Internal lining: cement mortar, 4.0 mm nominal / 2.5 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN500 C30, T-type Joint, Cement Mortar Lining with Zinc and Bitumen Coating
DN: 500 mm Spigot OD (DE): 532 mm Pressure class: C30 (C class per ISO 2531) Unit weight of body: 87.2 kg/m Total weight per pipe (incl. socket): 566 kg Internal lining: cement mortar, 5.0 mm nominal / 3.0 mm minimum External coating: zinc spraying + bitumen coating Joint: T-type flexible push-on Standards: ISO 2531, ISO 4179, ISO 8179-1
Ductile Iron Pipe DN400 with Epoxy Ceramic Coating
DN: 400 mm (catalogue T-type joint pipe range DN80-DN2600 applies) Coating: epoxy ceramic, internal Characteristics per catalogue: corrosion resistance, antistatic property, high abrasion resistance, long service life Applications per catalogue: water supply project, urban sewage discharge project; significant advantages in desert region or water-deficient area Standards: ISO 2531
Ductile Iron Sewage Pipe DN600, High-Alumina Cement Lining with Epoxy Resin Exterior Coating
DN: 600 mm (catalogue T-type joint pipe range DN80-DN2600 applies) Internal lining: high-alumina cement mortar External coating: epoxy resin, thickness >= 200 um Medium conditions: strong acid and alkali sewage, pH 4-12 Applications per catalogue: industrial effluent, domestic wastewater transmission pipelines Joint: T-type Standards: EN 598
Ductile Iron Gray-water Pipe DN300, Blue Epoxy Exterior with High-Alumina Cement Interior
DN: 300 mm (catalogue T-type joint pipe range DN80-DN2600 applies) External coating: blue epoxy resin, thickness >= 200 um Internal lining: high-alumina cement Applications per catalogue: treated wastewater reuse (toilet flushing, road greening, car washing, fire water, entertainment landscape), city gray-water transportation and disposal projects Standards: ISO 2531
Ductile Iron Flange Pipe DN100 PN16 (DN80-1200, PN10/PN16/PN25, Length 2-6 m)
DN: 100 mm (full range DN80-1200 mm) Pressure class: PN10 / PN16 / PN25 (this SKU: PN16) Unit length: 2 m, 3 m, 4 m, 5 m, 6 m (or according to client requirements) Applications per catalogue: pipe and valve connection, connection between different kinds of pipes, special areas where conventional flexible pipes can't be used Standards: ISO 2531, EN 545
Ductile Iron Jacking Pipe DN1200 (Non-Excavation)
DN: 1200 mm (jacking pipe per catalogue competitive-products range) Characteristics per catalogue: high strength, bears large jacking force Construction method: non-excavation (no damage to surface buildings, no impact on traffic) Reference application: DN1200 jacking pipe, Jiangxi province (catalogue project performance) Standards: ISO 2531
Ductile Iron Pipe DN800 with Inner Self-Restrained Joint (RJS / SJA, Anti-Pull-Out)
DN: 800 mm (self-restrained range certified DN80-DN1600) Joint type: inner self-restrained (types RJS and SJA), simple joint structure Characteristics per catalogue: high pressure capacity, high anti pull-out force, high resistance Applicable conditions per catalogue: soft soil foundation; foundation prone to settlement; high pipeline-safety requirements; bends where buttress is not suitable; overhead line laying Maximum allowable deflection: e.g. DN700-800 inner self-restrained joint pipe 2 deg (T-type 1 deg 30 min) Standards: ISO 10804, ISO 2531
Ductile Iron Pipe DN1000 with External Self-Restrained Joint (Anti-Stripping, for Slopes)
DN: 1000 mm (self-restrained range certified DN80-DN1600) Joint type: external self-restrained (locking ring + welded bead at spigot end + retaining ring with curvature + special gland + hooked-head bolts) Characteristics per catalogue: flexible connection as well as rigid connection; good anti-stripping performance; adaptable to foundation settlement caused by internal hydraulic pressure Applications per catalogue: areas with certain slope and complex terrain Reference application: DN1000 self-restrained joint pipe (catalogue project performance) Standards: ISO 10804, ISO 2531
Rubber Sealing Rings for Ductile Iron Pipe Joints DN100 (DN80-DN2600, per ISO 4633)
Size: DN100 (full range DN80-DN2600) Standard: ISO 4633 Use: sealing gasket for T-type push-on and self-restrained joints of ductile iron pipes Joint assembly per catalogue: clean gasket recess, lubricate gasket and spigot end with soap water or nonpoisonous alkaline lubrication, insert spigot into socket till the gasket at the same axis Standards: ISO 4633
Polymer concrete drainage pipe DN300 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN300 Inner diameter: 300 mm Wall thickness: 19 mm Length: 2500 mm Reference weight: 92 kg
Polymer concrete drainage pipe DN500 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN500 Inner diameter: 500 mm Wall thickness: 34 mm Length: 2500 mm Reference weight: 326 kg
Polymer concrete drainage pipe DN800 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN800 Inner diameter: 800 mm Wall thickness: 52 mm Length: 4000 mm Reference weight: 799 kg
Polymer concrete drainage pipe DN1000 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN1000 Inner diameter: 1000 mm Wall thickness: 63 mm Length: 4000 mm Reference weight: 1230 kg
Polymer concrete drainage pipe DN1350 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN1350 Inner diameter: 1350 mm Wall thickness: 84 mm Length: 6000 mm Reference weight: 1637 kg
Polymer concrete drainage pipe DN1800 (open-cut pipe)
Material properties (new polymer material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid and alkali resistance pH 1-10; corrosion resistant, no additional anti-corrosion protection required Pipe body: integrally cast by centrifugal casting process, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swelling sealing ring (sealing material: neoprene or EPDM) Optional fittings: coupling, reducer, T-type tee, Y-type tee Forming process: centrifugal casting method, wall thickness customizable, pipe length min. 500 mm, max. 6000 mm Specification: DN1800 Inner diameter: 1800 mm Wall thickness: 109 mm Length: 6000 or customized mm Reference weight: 2832 kg
Polymer Concrete Jacking Pipe DN300 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN300 (heavy-wall) Pipe Section Wall Thickness: 37 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 80 t Minimum Allowable Deflection Angle: 3°
Polymer Concrete Jacking Pipe DN400 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN400 (heavy-wall) Pipe Section Wall Thickness: 43 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 120 t Minimum Allowable Deflection Angle: 3°
Polymer Concrete Jacking Pipe DN600 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN600 (heavy-wall) Pipe Section Wall Thickness: 55 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 240 t Minimum Allowable Deflection Angle: 3°
Polymer Concrete Jacking Pipe DN800 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN800 (heavy-wall) Pipe Section Wall Thickness: 70 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 420 t Minimum Allowable Deflection Angle: 1.5°
Polymer Concrete Jacking Pipe DN1000 (Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN1000 (heavy-wall) Pipe Section Wall Thickness: 82 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP Allowable Jacking Force (heavy-wall pipe Grade IV, safety factor 2.0): 640 t Minimum Allowable Deflection Angle: 1.5°
Polymer Concrete Jacking Pipe DN1500 (Extra-Heavy-Wall Type)
Material Properties (New Polymer Material): material density 2.0-2.2 g/cm³; compressive strength ≥90 MPa (cement concrete approx. 30); tensile strength ≥8 MPa; flexural strength ≥23 MPa; shear strength ≥15 MPa; water permeability 0.17%; freeze-thaw resistance 500 cycles; acid/alkali resistance pH1-10; corrosion resistant, no additional anti-corrosion protection required Pipe Body: integrally cast by centrifugal casting, uniform and dense, good integrity Joint: SS304/316 stainless steel sleeve, internally fitted with water-swellable sealing ring (seal material: chloroprene rubber or EPDM rubber) Optional Fittings: coupling, reducer, T-tee, Y-tee Forming Process: centrifugal casting method, wall thickness customizable, pipe length minimum 500 mm, maximum 6000 mm Specification: DN1500 (extra-heavy-wall) Pipe Section Wall Thickness: 150 mm Pipe Section Length: 500 / 1000 / 1500 / 2000 / 2500 / 3000 mm or customized Manufacturing Process: centrifugal casting; Wall Thickness Category: heavy-wall pipe / extra-heavy-wall pipe; Grade: I–V Joint: Type I, steel sleeve reinforcement material (rebar / chopped glass fiber), optional material steel / 304 stainless steel / 316 stainless steel / FRP